If you just made a post, click here to view it.
02-08-2012 5:36:05 PM CST
New to the form lots of good info. Live in Virginia beach building a 65 Falcon
02-08-2012 8:49:14 AM CST
Idler Arm, I have heard you need to re drill and lower the idler arm (67 Mustang manual steering) for clearance, if so, how do you do this without messing up the frame, steering geometry.
02-01-2012 11:41:53 PM CST
any info on the f100 engine swap please call 7158270225
02-01-2012 11:31:40 PM CST
changing the engine in my 61 ford f100 form the 292 yblock to a 302 and c6 what can i do for engine mounts does anyone make a kit?
Fishook Kennie firstname.lastname@example.org
01-29-2012 1:22:21 PM CST
I would appreciate any info I can get on this project. I am doin an engine/tranny swap. 351W, 5spd into a 56 Ford Tudor Custom I think (no trim) replacing the 232-6cyl/3 spd OD. I need to know which mtr mnt conversion and what is needed to blot up the 5spd behind the 351W. he tranny isfrom a '96 Mustang 5.0 HO. I have everythig from the 5.0 from seperater plate to X-member. I dont remeber for sure but I dont think the flywheel and starter exchange with the 351 thanx.
01-11-2012 7:54:37 AM CST
I am shifting to Gen II mounts and headers on a 67 Mustang, but want to keep my Toploader, anyone done this. I know, the kit is for Autos but I like my gears. Thanks, Chris
Bob Chaffin email@example.com
01-03-2012 3:55:29 PM CST
I just ordered the Crites leaf spring relocation kit for my 69 mustang. Has anyone tried this kit with Cal-Tracs?
01-03-2012 3:56:41 AM CST
Has anyone put a tko 600 into a 62 fairlane or have any good info?
Sr Cheech Marin Marinh@airproducts .com
12-30-2011 9:08:46 PM CST
Hello! I had called earlier about Crites possibly offering a '64 Falcon hood with a '66/67 427 scoop on it. Any progress on it yet? Thanks, Sr Cheech.(p.s.Does anyone produce a replacement sheet metal radiator support for the 64/65 Falcon?)
12-20-2011 10:47:45 PM CST
If your looking for wheelwell headers try Mad Dog Headers. The guy makes some Great custom headers at reasonable rates.
12-07-2011 5:39:14 PM CST
Trying to find a supplier of "upswept headers" for my 1964 Falcon. Required according to FIA rules for Historic Racing.
Anybody able to help ?
12-06-2011 4:34:31 PM CST
Looking to do a 352 to 351W/C4 conversion in a 64 galaxie. Anyone here done this before?
Mike Peacock firstname.lastname@example.org
12-06-2011 2:33:51 PM CST
1955 Ford Fairlane, can someone help me, I am putting a 1990 460 ci. in it, what motor mounts can I use, would prefer bolt in, thank you, "KICKIN IT OLD SCHOOL"
12-04-2011 3:16:40 AM CST
does anyone make fenderwell headers for fe motors? i am building a fe powered 40 ford coupe and need a set.
keith baker email@example.com
11-30-2011 8:45:55 AM CST
keith baker firstname.lastname@example.org
11-30-2011 8:43:26 AM CST
working on 1964 comet cyclone dragcar
11-24-2011 10:26:35 PM CST
why is crites out of everything for 500? Needed door panels and van seat covers.
11-15-2011 7:22:10 PM CST
I need the trim for a 1964 Convertible Comet. Any suggestions of where I can locate this? I also need the trunk and door new lock cylinders, carpet, dash pad, weather striping, lenses and tail lights, along with the chrome around the tail lights. My number is 408-720-9222, thanks
irvin johns email@example.com
11-08-2011 10:55:46 PM CST
need windshiedl for 64 Fairlane
11-02-2011 8:54:23 PM CST
Does anyone make replacement panel for under the rear window of 64 galaxie fast back. The section between the trunk hinges where the window is seated at the base.
10-24-2011 6:52:55 PM CST
i put a 429 in a 64 galaxie i am looking for suggestion on how to build the throttle linkage
10-20-2011 12:36:58 PM CST
Anyone have an early maverick 5 lug rear, Has to be early so its narrow and th perchs match the early falcon. Thanks
10-10-2011 2:25:50 AM CST
I need a set of bucket seats for a 65 falcon. Also all the parts to add a 4 speed to my car,thanks. call 606-831-4140 or firstname.lastname@example.org
09-30-2011 11:26:24 PM CST
need the right side 1/4 panel chrome strip from the door to tail lite for a 1964 fairlane 2 door.
this is the narrow strip not the fairlane 500 trim.
09-20-2011 7:19:10 PM CST
My Fairlane uses crites fiberglas hood, fenders, frt&rr bumpers, and ram air tubes and ram air tube panel ,351C 4 spd top loader 63 Galaxie 9" housing thanks !!!