If you just made a post, click here to view it.

Seth Ford   sethford1957@yahoo.com
03-05-2015 10:51:50 AM CST

This vehicle is on Charlotte Nc craiglist Thanks

Seth Ford   sethford1957@yahoo.com
03-05-2015 10:51:36 AM CST


Seth Ford   sethford1957@yahoo.com
03-05-2015 10:51:31 AM CST


Seth Ford   sethford1957@yahoo.com
03-05-2015 10:51:25 AM CST


Seth Ford   sethford1957@yahoo.com
03-05-2015 10:47:36 AM CST

1964 comet 202 2 dr post. Needs restoration, in pretty good condition for age. Asking 2500.00

r dyson   dyson.robert@ymail.com
02-24-2015 8:09:28 PM CST
I have a '63 Galaxie with the factory 3-speed automatic trans. Can anyone give me some tips on a C-6 FE swap? I've got the C-6 freshly rebuilt and ready to go. Just need to know what else it's going to take. Modifications, etc. Thanks.

ford_george   ghouk@comcast.net
02-20-2015 8:23:06 PM CST
Looking for a aluminum bumper for my 64 Fairlane Thunderbolt. Does anyone have one for sale or know where I might get one?

Kurt   kurtandteresa@hotmail.com
02-16-2015 10:39:28 PM CST

I got her out from hibernating in a private collection for 7 years. Needed lots of TLC but come around now. Super strong Side Oiler! Len had his hand in it to build this tribute car 10 years ago. I'm looking for the correct battery and also was wondering about the quality of the intake hoses sold by Crites. I ran across a blog where a guy complained about the hoses. Thanks for any help! Kurt

BRANDOFLAY
02-15-2015 2:55:19 PM CST

Has anyone bought these from crites? Just wonder if they had any problems installing. 1962 - 1965 Front Frame Rail Repair Kit   .

mark   markrd71@aol.com
02-02-2015 7:10:54 PM CST
looking for a origional bolt on hood for a 68 fairlane shipped to south Florida

Tim Roberts   timroberts076@gmail.com
02-02-2015 3:30:54 PM CST
I remember some time ago, reading about mounts to put an FE in a 64 Falcon. They used angle iron on each frame rail, and the mounts just fastened to that,retaining the stock shock towers. then used the FE insulators. Im doing a 64 Comet. Can someone refresh my memory on this??

Carl Jones   jonesboys@live.com
01-19-2015 11:56:41 AM CST
I have a 1961 Lincoln Continental 430ci stock car is 90% original; installed disc brakes from a 66 Lincoln Continental, had to change to 15in.wheels.OK my problem is tranny wont move in reverse? anyone know if you can make a direct swap with a rounded bell housing mid 60's (390ci) pattern type C6 trans.

Jeff Fegley   jtfracing@msn.com
01-12-2015 12:45:48 PM CST
I have for sale; rear seat (bottom & back) for a 1963 Fairlane 500 2-door sedan. Color: black. In very good condition. $500.00 Allentown Pa. area.

Dale Hoffman Sr   dalehoffmansr@gmail.com
12-28-2014 6:25:24 PM CST
hey ford guy's dale here .i have a 57 ranchero with a fe 390 year is about65 . im looking for headers and i hear so many different story's about the different headers that will and will not fit .crites headers seem to be the best fit ? can anyone tell me a little about them or any others headers that may fit better.

brian mathesontec662003@aol.com
12-15-2014 10:39:52 PM CST
will crites headers fit my 61 falcon 351w without the shock tower kit

Monique   mpdoney@hotmail.com
12-10-2014 5:33:27 AM CST
Monique 12-10-2014 4:30:41 AM CST Hi there could someone please help me i have been looking for weeks online trying to find a set of headers to fit my 1971 ford thunderbird with a 429 thunderjet i know the lincoln continental and the galaxie shared the same chassis ect iv even looked for headers for those models and no luck someone must make them to fit my car i dont want to buy some that dont fit as i live in australia and postage costs a fortune so would really appreciate it if you could helpMonique

Monique
12-10-2014 4:30:41 AM CST
Hi there could someone please help me i have been looking for weeks online trying to find a set of headers to fit my 1971 ford thunderbird with a 429 thunderjet i know the lincoln continental and the galaxie shared the same chassis ect iv even looked for headers for those models and no luck someone must make them to fit my car i dont want to buy some that dont fit as i live in australia and postage costs a fortune so would really appreciate it if you could helpMonique

John Devins   Roswellinvasion@yahoo.com
12-01-2014 8:41:26 PM CST

62,63 ford Fairlane two door left rear quarter panel. Solid with no rust. Been in storage over 30 years. $625

terry allen
11-29-2014 4:19:09 PM CST
have for sale nos 3 piece rear aluminum trim panels for 64 fairlane 500 do not have gas door handle $1,375 (330)482-9813

terry allen
11-29-2014 4:13:27 PM CST
have a new set of black a- 100 seats like used in thunderbolt fairlanes $850 (330)482-9813

Ron Lane   ib-ron@mchsi.com
11-28-2014 5:52:38 PM CST
Obtained a set of Crites motor mounts for small block Ford that have the single stud that mounts to the shock tower base. Can you tell me the torque specs for the two bolts that attach the mount to the side of the engine. Also, in the same deal, I obtained the Crites lower cross member that was told "replaces" the rount cross member and that the round cross member should be removed for header clearance. I'm installing a 351 Cleveland in my 64 Fairlane and will either use stock exhaust manifolds or have custom headers installed. Do I really need to remove the round cross member? Can I use the stock and the Crites cross members together or is that an overkill. Any info would be greatly appreciated. Ron

Billy   Billyveach@yahoo.com
11-23-2014 7:29:39 PM CST
looking at your subframe connectors and curious i know it says 62-65 falcon but can they be used on a 61 falcon? also can your c6 tranny crossmember be used on a 61 as well/ would love to order them both for my falcon if they will work. Also can you pleae send pics of your subframe connectors and transmission crossmember as I want to see how they look and mount on the car to see if it will work with my application and duel exhaust. Thanks for your time i hope they will work so i can make an order here soon.

justin karcha   j-karcha-16@hotmail.com
11-21-2014 12:16:14 AM CST

Was wondering if it states weight differences on the fiber glass panels ( inner/outer fenders, front/rear bumpers and stone guard) for my 65 compared with steel. Already have the tear drop hood also not sure on the weight savies from that? Have a 460 swap and aluminum wheels and im around 4100lbs with me in it and im around 185.

Rick Morris   mrrickmorris1@gmail.com
11-19-2014 6:00:51 PM CST
Hey Man, Does any body make the molded rubber floor mat for a 1963 fairlane hardtop Thanks in advance,Rick

Alfredo pabatao   Apabatao5951@yahoo.com
10-30-2014 7:50:46 PM CST
2001 altima front exhaust pipe

PREV   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   NEXT









TTWS